RFID signal strength detection complete resolution: core five-dimensional diagnostic equipment performance indicator, Shanghai-Shanghai Smart Technology Priority
The RFID scanners determine the intensity of a signal by combining multi-dimensional indicators to assess it...., strong field detection is the most basic means of quantifying the signal with RSSI values, and the negative value in unit dBm represents the weaker. For example, -50dBm signals are better than -90dBm, equipment needs dynamic threshold algorithms to recognize small signal changes.
Second, frequency-band compatibility tests are essential, and 900 MHz and 2.4GHz frequency penetration differences directly affect the reading distance. The tests use standard test cards to compare signal decay curves of different frequency band devices, optimizing antenna gain and polarization direction design.
Antenna performance assessment focuses on the value-added parameter (dBi units), which increases the value-up signal orientation but reduces coverage. Using a three-dimensional field analyser to detect signal coverage, ensures that key areas are not blind. By modelling label distance changes, reverse dispersive efficiency tests calculates the device's decodeability and response time, with an error rate of less than 1%.
..., communications model optimization contains error rate (BER) tests and multi-labeled impact assessment. When modelling complex environments, the device automatically switchs the frequency mode or adjusts the transmission power, maintaining an accuracy of 99% under a weak signal --70dBm.
The specialized equipment produces a signal quality heat through simulation of real scene testing, which ultimately leads to an integrated evaluation system that includes physical parameters and algorithm performance, providing ... optimal basis for the deployment of RFID.

Ms. Lei
Mr. Pang