2024 Radio-frequency soft tag shopping guide: This 5 core parameters must be read
RFID Knowledge

2024 Radio-frequency soft tag shopping guide: This 5 core parameters must be read

PublishedShanghai Zejie Smart Technology Co., Ltd.

When choosing flexible RFID tags, consider both technical compatibility and suitability for the application. In 2024, the market put greater emphasis on matching specs to real conditions. Pay particular attention to the following five parameters, as they directly affect performance.

I. Working frequency: "sign key" matching scene

The frequency determines the reading-writing distance and ability to resist interference, which is divided into three categories: low frequency (about 125 kHz) suitable for short range recognition, such as animal management; high frequency (13.56 MHz) supports encryption, matching book tracking, payment scenes; UHF (860-960 MHz) can read-write at a distance of more than 10 metres, which is a mass scan of logistics...

Environmental resilience: “protective shield” to respond to complex scenarios

The following parameters for protection are to be verified according to the use of the environment: selection of an IP68 water-resistant level by wet or water-washing scenes (e.g., weed management) that can withstand a label of industrial washing more than 200 times; high temperature scenarios (e.g., car manufacturing) that need to meet -40 ~150 °C high temperature-temperature tests; and flexible metal-resistant tags for metal surface applications whose special antenna design overcomes signal interference.

III. Literacy: “core indicators” for ensuring efficiency

Key visual sensitivity and read distance, Sensitivity is recommended - 18 dBm and below to ensure stable recognition in weak signal environments; reading/writing distance needs to be matched with equipment, such as a 4W handheld, metal surface-reading distance should not be less than 4 m, liquid surfaces should not be less than 1 m. Attention is also paid to the number of wiping (over 100,000) and data storage times (more than 50 years of recommendation) to meet the need for reuse and traceability.

Materials and viscosity: “Accompanying basis” for the appropriate vector

The mass determines the label selection: paper carriers can select non-dry glue labels for Grasing paper, and metal / spray paint surfaces need high performance acrylic stickers; soft curves (e.g. clothing, hose) give preference to PET or fabric material labels to ensure that they are stable when bending. Note the adhesive strength, low temperature environments need to be fitted with preheating and reinforced bindings to avoid falling off.

Passive labels are low, long, suitable for large-scale applications such as retail; semi-active labels are high, but they are highly disruptive and fit complex industrial scenarios. When you purchase a batch, you can give preference to supporting data-based replacements, the manufacturer customised by LOGO, reducing subsequent processing costs, comparing unit cost with service life, avoiding neglect of reuse value at low prices.