How does the asset management system access the RFID inventory count?
The key to the asset management system's access to RFID counts is not hardware, but data channels. The following approach is to align RFID readers, intermediate (i.e. bridge-to-bridge software that connects reading and writing devices and business systems) with the same set of master data, and the results can be returned to the system in dozens of seconds, and the daily count cycle can be compressed until the day. This is what we run through in multiple projects.
Point 1: Clean up the asset desk and determine the scope of RFID
RFID is not all-asset. A typical manufacturing company, with tens of thousands of assets on its books, often only two or three thousand items -- mostly high value, mobile equipment, such as servers, detection devices, molds. The remaining low-value or fixed-in-the-mode asset, using traditional bar codes or artificial ZZZQZ, is more cost-effective.
The following is a three-step proposal:
- Value-based: If a large unit is larger or the loss will affect the business, it is classified as RFID; the rest is classified as normal.
- Layer by moving frequency: equipment that is regularly assigned across sectors is prioritized and can be delayed for many years after a procurement.
- By environmental use: metal surface assets requiredAnti-Metallic Tags(a special RFID label with a shield) A normal paper or plastic shell asset can be labelled, and the cost of procurement will be approximately double.
The account field is bound to the EPC code in the RFID label (Electoric Production Code, corresponding to each tag ID number). It is recommended that each asset be placed with a "RFID tag" field on the system, initially empty, and then filled back when it is marked. Without this step, the data of the subsequent count does not return to the right asset.
Element 2: Hardware Selection Matches the Accumulation scene, not pursues high parameters
The RFID hardware has three typical combinations, corresponding to different scenarios:
- Handheld Terminal + Normal Label: A single-person operation, suitable for inventory in a warehouse or on the inside floor, with hundreds of labels read at one time and an order of magnitude faster than manual.
- Fixed Channel Reader + Orientation Label• Appropriate for asset access control, such as the installation of an antenna at the machine room and the archives door, and immediate alerts to unauthorized removal.
- UAV +UHF tag: Suitable for large warehouses or outdoor yards. More than 10,000 assets can be counted in tens of minutes, but the upfront cost per unit is relatively high.
In frequency selection, UHF (860-960 MHz) is the dominant, with long reading distances (3-8 metres), lot readable fast, but easily shielded by metals and water; HF (13.56 MHz) is strong against interference, but only 10-30 cm can read, and the count is low. In asset inventory scenarios, HHF is the default option, unless assets are stacked on metal shelves.
Two common pits for tag purchase
One is to calculate the unit price for ignoring writing services. The RFID labels are only empty in the EPC area, and you need to write an asset number with a writer, which you can do or let the supplier do. Do it yourself, you need to purchase a coder+ software, and you can make the vendor's unit price slightly higher, and you can calculate the total cost difference by lot.
Second is to ignore the label life. The normal non-dry tape label drops off in 2-3 years after it is posted outdoor or high temperature (>60°C), and the industrial label can last 5-8 years at several times higher unit prices, saves hours of work for reposting.
Element 3: Intermediate and interface access to auto-repeated inventory data
The RFID reader does not speak directly to the asset management system itself, and one layer is required in the middleRFID Middle. It filters over-reading, denocations, and arranges data according to the rules, before moving results through API to the operating system.
The interface is designed with two key points:
- The main data is synchronized in two directions. When the RFID tag is pasted, the EPC returns to the asset system ' s "RFID label" field; and the asset number, name, state of the asset system is also sent down to the middle to compare the type of asset that the read label belongs to. This sync recommends a time-fixing task, running every few minutes, avoiding real-time interfaces breaking down the database.
- The inventory results are structured. After the handheld has cleared a series of labels, it produces an inventory log file in JSON format (a commonly used data transfer format), which contains read-to time, EPC number, reader number, signal strength, upload to the middle; the intermediate is decommended and calls the Asset Management System 'Scatter Update Status 'interface, marking the corresponding asset as "Done" and writing the latest count time.
Shanghai Picket Technologies has used this link in several access projects. After the intermediate and business systems are twin-wayed, the count is automatically written back from the original manual Excel to the second level, and the inventory of human and financial reconciliations is virtually gone.
Point 4: Processes run, making "cleaning the record" a habit.
The technology is not complete, the process is not up to date, and the inventory data is just a bunch of numbers that lie in the system. The events that RFID reads are needed to trigger actual business actions:
- Additional assets: Handheld scanner tags are used to store goods and the system automatically creates asset cards without any need for manual entry of asset numbers.
- Redeployment of assetsWhen equipment is transferred between the two departments, the original department scans a sign "trip out", the receiving party scans a sign "tick in" and the system automatically generates a transfer order.
- End-of-life assets: The scanned tag system pops up the end-of-life approval process, automatically updates the asset status as "end of life" after approval and stops subsequent count alerts.
- An unusual alarm.: Inventory of assets that cannot be read in labels, automatically entered the "to be verified" list; read labels are not on the desk account, automatically entered into the "unowned asset" list and are cleaned up by the asset administrator on a regular basis.
The key to running this process is "incident driven." Each sweep corresponds to a clear next move, and the operator sees business results, not a bunch of original readings.
Element 5: Authority, auditing and data security
Once RFID counts are connected to the asset system, the inventory operation becomes financially significant and it is clear in the system that who can take stock of what equipment and how much time they can use to make an inventory and what results they can modify:
- The inventory is divided by role. Asset managers can initiate an inventory mission and view the full inventory results; department users can only see the inventory status of their assets, which cannot be modified.
- Handheld and rewrite.Device binding. The equipment number of each handheld is registered in the system and data read by the unregistered device cannot be accessed to prevent people from forging inventory records with external readers.
- The inventory log is maintained for a sufficient period of time.
Point 6: Sustained governance after go-live, avoiding system "age"
The common problem after some time when RFID counts are online is not the bad hardware, but the data drift - the drop-off of tags, changes in asset location and late labelling of new assets, which will allow the accuracy rate to drop from its initial high level.
It is proposed to set up a "data health" board, which will look at three indicators on a regular basis:
- Label binding rate: The total number of assets/desk accounts with labels in the account should be maintained at a high level.
- An inventory of missing reading rates: Number of labels that cannot be read at the time of the count / Total number of labels to read, which are checked for label or writer problems above a certain threshold.
- No-owner tag rate: The total number of labels read in the inventory but not in the billboard / Read-in labels, which exceeds a certain percentage, indicates that new assets are not registered in time.
In the event of an anomaly in these three indicators, the person is assigned to carry out a tag check or desk update within one week and cannot be delayed until the time of the quarterly large inventory.
Summary
RFID accesss asset management systems, technology is just the first step. The real thing is:
- (a) Consider the scope of the labelling and data fields first, so as not to be greedy;
- (b) The interface and business processes are designed in conjunction to avoid a disconnect between technology and business;
- The data health is continuously followed up on the line, and the inventory is treated as a daily operation rather than an annual project.
If your asset desk account is digitized but the inventory count still depends on manual, it would be worth selecting 20 to 50 high-frequency mobile assets for a pilot RFID, running through the intermediate interface and the inventory process before deciding whether to extend the full volume.

Ms. Lei
Mr. Pang