MIT solved the problem of "bypass attack" on the RFID tag.
Industry News

MIT solved the problem of "bypass attack" on the RFID tag.

PublishedShanghai Zejie Smart Technology Co., Ltd.
The MIT, and the U.S. Co.T. instrument (TI) researchers, have worked out three major design techniques.RFID TagThe “side attack” problem most often faced by the chip has significantly increased the safety of RFID.
Only a small amount of information can be leaked at a time, and to get the full key, multiple decryptions of the same key are required to obtain enough leaks. For this, researchers add a random sequence generator to RFID tag chips, change the key after each transaction, run the same sequence generator on the central server, and verify the validity before reading the RFID chip.
Because the RFID labels are power-powered mainly by a reader, the method of increasing random sequence generator cannot still respond to the Power Glash attack, which is that the attackers cut off the power supply in due course before new keys are generated, so that the chip will remain old after the power has been restored. By doing this overtime, the assailant can force the chip to work under the same key until sufficient information is available for an attack by side. For this reason, researchers have two initiatives, one to add "on a piece of power" to ensure continued power supply, and the other to use non-removable storage units to store data that pre-power chip is being processed.
In non-deposit storage units, researchers use the magnet crystal. Its central atoms can move in the direction of the electric field when they are added to the field, and cause charge-burning penetration when they pass through an energy barrier that is sensitive to internal circuits and recorded as a non-fragmentary storage of data once the central atoms remain intact after being moved to the electric field. TTI is one of the main producers of the global iron random storage (FRAM).
Although 3.3 V capacity is charged first each time the power supply is restored and a previous uncompleted calculation has been completed, the chip was tested to be capable of being readable 30 times/s, faster than most RFID chips at this stage.