RFID Component
Industry News

RFID Component

PublishedShanghai Zejie Smart Technology Co., Ltd.
Typical RFID systems consist of labels, readers, antennas, printers and software. A typical RFID label has a micro-integrated chip, an antenna and some form of shell. The active tag has built-in power sources, such as internal batteries. The labels have various formats, such as hard tags, elasticity, badges, cards, wristbands, key chains, labels, bills and mosaics that can be converted into all the above applications.
RFIDThe labels can be read-only or read-written, depending on the use of the labels. Some are preprogrammed or can be programmed in situ.
RFID readers can be handheld or fixed. Handheld readers are used to read labels manually, as they do for manual scanning hardware assets when you travel through a data centre. Fixed readers are used to mark applications, such as using an ID card to access the data centre or items that are being scanned while downloading the transfer belt.
The RFID antenna is usually used in the near or far field, which is often defined as a range of less than 15 inches, and the distant antenna can be read from a wide range, from one inch to a few feet. And the RFID antenna is divided into three different categories, related to oscillations and other properties.
Many labels can be programmed using continuous ID, but they can also be printed by their own printer. It is essentially a hot-sensitive printer that codifies information on a sticker chip and prints labels with human readable information.
Another important component of RFID is the software that supports tag communication. Many suppliers provide ready-made applications for this, usually as part of the RFID containment solution. Another option is to connect directly to their own infrastructure, using intermediate applications or using a driver connected to existing backend data repositories.