Application of RFID technology in data collection
RFIDIt's the initial name of Radio Frequency Identification, i.e. wireless frequency recognition.RFIDCommonly known as sensory electronic chip or near card, sensor card, non-contact card, electronic label, electronic bar code, etc.RFIDTechnology is a non-contact automatic recognition radio frequency technology that automatically identifies the target through a radio frequency signal and obtains relevant data, which does not require manual intervention and can work in various adverse environments.RFIDTechnology can identify high-speed motion objects and can also identify multiple electronic labels, which are operational and easy. As a non-contact information gathering technology, RFID is used to collect information in environments that are not afraid of bad conditions such as oil stains or dust pollution, and can replace bar codes in such environments, for example, for the production of flow water lines in warehouses or workshops.
A complete set.RFIDThe system consists of the following four parts:
Label: Composed of coupling elements and chips, eachRFIDThe label has a unique electronic code, which is attached to the object and is commonly referred to as an electronic or smart label. Depending on whether you have a signal from the power source that you can launch a certain frequency, the label is classified as active (active) and passive (passive).
Reader/Rewriter: Equipment to read (and sometimes write) label information, which can be designed as handheld or fixed.
Antenna: inRFIDPassing radio frequency signals between labels and readers.
Data transmission and processing systems:RFIDThe system works as follows: the electronic label automatically receives an electric field frequency when it enters the range of magnetic fields that receive antennas.RFID(a) An antenna-launched electromagnetic wave signals, the induction of currents within the label, activation of the working status of the label-enabled antenna and feedback on product identification information in the tag chip;RFIDReaders, after reading and decodeing feedback data information, transmit the organized information to the Information Management System for storage and processing of relevant data.
RFIDTechnology is widely used in manufacturing.RFIDThe system provides a constantly updated flow of real-time data that can be used to ensure the correct use of labour, machines, tools and components, thus achieving paperless production and reducing downtime, so as to guarantee reliability and quality; collect information such as product identifiers, physical properties, order numbers, auto-create quality tracking and work history documentation required to support quality assurance systems; and achieve complex batch tracking. Especially in the production of mixed assembly lines, it is possible to accurately deliver assembly parts to designated areas, thereby reducing error rates.
RFIDThe use of RFID in manufacturing is mainly used for the automated identification management of work items, control of production processes, tracking of intelligent objects, etc. In order to manufacture by order, it is necessary to identify the information on the work line in a timely and accurate manner to ensure that the parts are properly assembled at the right place; the control of production processes can be broken down into production status monitoring and visualization, closed loop production plans and controls, and workshop physical control optimization. Smart object tracking point.RFIDTechnically tracking these bindings.RFIDThe past, present and future potential status information of the labeled smart object is used and processed.
ApplyRFIDTechnology enables full tracking of products from raw materials to final products.RFIDYou can get data and monitor the engine assembly process.RFIDStorage, each of the posts.RFIDRead and write headers, which record assembly information obtained at each of the workstations: the only serial number (engine number), the event during engine processing and its time, batch numbers for the key parts of the engine, test data during engine assembly and hard-tightness rectangles. At the lower stage of the engine total, read and write head to read the information stored in the memory, send it to the central control room data management server for storage and management.RFIDThe production process records created by the system provide reliable data for future queries and retrievals, while a retroactive system is established for each engine's production process and its parts. AVI is another typical application of RFID technology in car total production. The system automatically identifies the customer requirements contained in each vehicle so that it can organize production. For example, when white body comes to the paint shop, the control system should be able to identify the required colour of the vehicle through RFID-based vehicle identification, and automatically convert the jet head. When the body is moved from the coating workshop to the main workshop, the vehicle identification system should be able to print a load list based on body information, suggesting that operators install different selections according to the vehicle; when the vehicle is offline, the vehicle identification system will read the actual processed information of the vehicle and make it a report to management.
Based onRFIDapplications in manufacturing execution systems (MES) fall into four general use cases:
Based on FixedRFIDFixed space control mode for detection of readers/ antennas: “entry/departure” event for RFID-marked objects installed at fixed sites in the RFID detection space.
Based on FixedRFIDMobile detection space control mode for readers/ antennas: “entry/depart” event for RFID-labelled objects, mounted in a vehicle-borne RFID reader/sky, which is located in a mobile RFID detection space, such as transport cars, stock forklifts, etc.
RFIDReader/Airgate Door Ban Control Mode: At a restricted or fixed point of detection, a fixed RFID/Attendant detects the “entry/departure” event for RFID-labelled objects. Given the transient nature of both events, it can be integrated into a “door-ban” event.
Based on MovementRFIDRandomly detected space control mode for readers/ antennas: random status tracking of RFID-labelled objects using handheld RFID (with antenna) readers, both in fixed RFID detection spaces (e.g., when the object is available through a handheld RFID reader scan) and in mobile RFID detection spaces (e.g., by scanning the target through handheld RFID readers in warehouses and reading its status information).
A complete set.RFIDThe system consists of the following four parts:
Label: Composed of coupling elements and chips, eachRFIDThe label has a unique electronic code, which is attached to the object and is commonly referred to as an electronic or smart label. Depending on whether you have a signal from the power source that you can launch a certain frequency, the label is classified as active (active) and passive (passive).
Reader/Rewriter: Equipment to read (and sometimes write) label information, which can be designed as handheld or fixed.
Antenna: inRFIDPassing radio frequency signals between labels and readers.
Data transmission and processing systems:RFIDThe system works as follows: the electronic label automatically receives an electric field frequency when it enters the range of magnetic fields that receive antennas.RFID(a) An antenna-launched electromagnetic wave signals, the induction of currents within the label, activation of the working status of the label-enabled antenna and feedback on product identification information in the tag chip;RFIDReaders, after reading and decodeing feedback data information, transmit the organized information to the Information Management System for storage and processing of relevant data.
RFIDTechnology is widely used in manufacturing.RFIDThe system provides a constantly updated flow of real-time data that can be used to ensure the correct use of labour, machines, tools and components, thus achieving paperless production and reducing downtime, so as to guarantee reliability and quality; collect information such as product identifiers, physical properties, order numbers, auto-create quality tracking and work history documentation required to support quality assurance systems; and achieve complex batch tracking. Especially in the production of mixed assembly lines, it is possible to accurately deliver assembly parts to designated areas, thereby reducing error rates.
RFIDThe use of RFID in manufacturing is mainly used for the automated identification management of work items, control of production processes, tracking of intelligent objects, etc. In order to manufacture by order, it is necessary to identify the information on the work line in a timely and accurate manner to ensure that the parts are properly assembled at the right place; the control of production processes can be broken down into production status monitoring and visualization, closed loop production plans and controls, and workshop physical control optimization. Smart object tracking point.RFIDTechnically tracking these bindings.RFIDThe past, present and future potential status information of the labeled smart object is used and processed.
ApplyRFIDTechnology enables full tracking of products from raw materials to final products.RFIDYou can get data and monitor the engine assembly process.RFIDStorage, each of the posts.RFIDRead and write headers, which record assembly information obtained at each of the workstations: the only serial number (engine number), the event during engine processing and its time, batch numbers for the key parts of the engine, test data during engine assembly and hard-tightness rectangles. At the lower stage of the engine total, read and write head to read the information stored in the memory, send it to the central control room data management server for storage and management.RFIDThe production process records created by the system provide reliable data for future queries and retrievals, while a retroactive system is established for each engine's production process and its parts. AVI is another typical application of RFID technology in car total production. The system automatically identifies the customer requirements contained in each vehicle so that it can organize production. For example, when white body comes to the paint shop, the control system should be able to identify the required colour of the vehicle through RFID-based vehicle identification, and automatically convert the jet head. When the body is moved from the coating workshop to the main workshop, the vehicle identification system should be able to print a load list based on body information, suggesting that operators install different selections according to the vehicle; when the vehicle is offline, the vehicle identification system will read the actual processed information of the vehicle and make it a report to management.
Based onRFIDapplications in manufacturing execution systems (MES) fall into four general use cases:
Based on FixedRFIDFixed space control mode for detection of readers/ antennas: “entry/departure” event for RFID-marked objects installed at fixed sites in the RFID detection space.
Based on FixedRFIDMobile detection space control mode for readers/ antennas: “entry/depart” event for RFID-labelled objects, mounted in a vehicle-borne RFID reader/sky, which is located in a mobile RFID detection space, such as transport cars, stock forklifts, etc.
RFIDReader/Airgate Door Ban Control Mode: At a restricted or fixed point of detection, a fixed RFID/Attendant detects the “entry/departure” event for RFID-labelled objects. Given the transient nature of both events, it can be integrated into a “door-ban” event.
Based on MovementRFIDRandomly detected space control mode for readers/ antennas: random status tracking of RFID-labelled objects using handheld RFID (with antenna) readers, both in fixed RFID detection spaces (e.g., when the object is available through a handheld RFID reader scan) and in mobile RFID detection spaces (e.g., by scanning the target through handheld RFID readers in warehouses and reading its status information).

Ms. Lei
Mr. Pang