RFID technology makes electric cars more intelligent to steal.
Industry News

RFID technology makes electric cars more intelligent to steal.

PublishedShanghai Zejie Smart Technology Co., Ltd.

RFID can help electric vehicles to be identified at specific points of entry and exit, supporting registration, authorization and area access control, but general passive tags do not have an independent remote reporting capability.

Identification, regional presence and continuous positioning are not the same thing.

A RFID reading point is recognized, which usually provides a clue to the area covered by the reading point; it does not naturally give continuous coordinates. If a programme needs to locate, a separate definition of positioning technology, cover design, update cycle and shielding conditions should be provided, so that the read distance cannot be converted directly to position accuracy.

The electric car needs to be secured.

When a vehicle leaves the reading point, the system may keep only the last record of its occurrence.

Failure to read does not necessarily mean that the vehicle was stolen; legal out-of-home failure, containment and equipment failure can produce a similar phenomenon.

The electric car label is not the same function as the remote location device. Fixed reading points provide a record, but do not guarantee that the vehicle will be kept in place. It is more valuable to the user to explain that the cover and the search of the border is better than vague promises, and it prevents miscalculation of non-observed observations.

Why isn't one success enough?

If the vehicle leaves the park legally and does not produce new readings, the platform should show the last time of observation, rather than keeping a position that appears to be in real time for long. Clear information is time-barred, preventing users from misbelieving old data when they search for it in an emergency, and it is also the duty of anti-piracy services.

Location should include time limits and uncertainty

A location result that does not indicate when, by what device and to what extent it is credible may give the impression that users are over-defined. The end result is a region, currently estimated area, and precise coordinates should be expressed differently. In the absence of a new event, the system should be less certain or alert to verification rather than an unlimited extension of the old position. This is particularly true for loss prevention and human services: older but accurate icons may be more misleading to follow up than simply specifying the last reading point.

Don't just look at the successful samples.

Observation dimensions Evidence to be retained
Space syntax Use different fields for reading points, areas and coordinates
Update the statute of limitations The event was measured separately from the delay shown in the interface
Misreporting and disposal No new observations should not simply be interpreted as leaving
This is the key trade-off. Is the programme committed to reducing the probability of being taken away or to providing a search trail after it has been stolen?

It's recommended that this be verified.

Tests of legal access, unauthorized departure and offline time to clarify whether the alarm is a clue or verified theft.

It is suggested that the answer should be “whether or not” through “the current area” or “continuous coordinates.” Using a genuine entry route, blind areas, multiple persons or objects are tested for blockage, stopover and reverse movement before assessing whether operations will accept uncertainty.

It's worth asking.

Is the programme committed to reducing the probability of being taken away or to providing a search trail after it has been stolen?

Technical and factual references