RFID radio frequency recognition technology for steel bottle management
Industry News

RFID radio frequency recognition technology for steel bottle management

PublishedShanghai Zejie Smart Technology Co., Ltd.

The RFID on the cylinder can connect to the bottle file, test and flow records, but a readout does not make an expired or defective bottle safe.

The issue of the metal environment must be discussed with an installation structure

Metals change the electromagnetic environment around labels, matching antennas that used to work in the air and changing radiation conditions. Improving these conditions through specialized design does not mean that all metals, curvatures and installation positions can achieve the same effect. The three different test situations are those where labels are embedded in a dent, placed on curved crusts and placed on flat steel plates.

The bottle ID is no substitute for security.

The system shall record the bottle identity, test state, medium suitability and current flow chain separately.

The installation cannot damage the bottle structure, and equipment used in a hazardous environment must also meet the requirements.

The change of valves, maintenance and end-of-life changes the state of a steel bottle, but it should not be erased. The mark must be retrograde to the original bottle, and no new number should be used to make old risk records disappear.

Put this in a specific process.

A bottle may contain new labels, but the test cycle should still be based on a bottle file rather than a date of manufacture. Mixing the two could make historical risks disappear when changing the labels. Digital identity updates must remain continuous in the physical life cycle and cannot be a shortcut to recalculating security qualifications.

Disassembly failures into chain changes and business changes

Labels receive working energy and send information back to the reader are relevant but different links. Structural changes in metal proximity may affect one or two of them at the same time. In addition to seeing whether it is readable, testing should focus on what configuration is needed to stabilize work and whether this configuration expands.

Let's look at the input and the results.

Observation dimensions Evidence to be retained
Effective Installer Level, Curve, Tile.
Identification of borders Record available areas, and also areas where adjacent items have been read
Maintenance costs Whether to retie and verify after replacement
This is the key trade-off. Who is responsible for the real implementation of “not allowing filling” to take place when technology makes information more accessible?

It's recommended that this be verified.

The system is capable of maintaining the original file and the reasons for manual approval by empty bottle recovery, pre-fill verification, abnormal interception and tag replacement exercises.

The location of the installation, the direction of the label, and the surface processing can be used as three variables, with a fixed reader and an antenna being changed after each item. Saves a map to read success and failure, then decides whether to add the antenna or replace the tag; increases the launch power directly, possibly simultaneously expanding the serial reading range.

It's worth asking.

Who is responsible for the real implementation of “not allowing filling” to take place when technology makes information more accessible?

Technical and factual references