Type of communication and frequency for RFID labels
In addition to the frequency classification,RFIDThe labels and systems operate within specified sectors. These include active and passive.
SourcedRFIDThe label itself has its own transmitter and power (usually a battery).RFIDThe labels are within the scope of the UHF and can in some cases be extended to 100 metres.
SourcedRFIDThe label will be equipped with a transponder or beacon transmitter, and usually includes sensors for measuring and transmitting temperature, humidity, shock/vibration and other data on the object they attach to. Transponder only transmits data when it receives signals from readers (such as toll payments or control checkpoints), while beacons send signals at pre-set intervals and are used to track items in real time positioning systems (wheel chairs or containers in hospitals) at the shipping dock.
But, no source.RFIDThe labels remain dormant until the signal from the reader is received. The energy from the reader's signal is used to activate the label and to reflect the message into the reader. These labels require only one chip and an antenna, making it more cost-effective, smaller, more productive than the active tag counterpart.RFIDSystems can operate at any frequency range, although they are usually paired with the UHF range to enhance their widespread use in product and tray labels.
RFIDThe label can be divided into three categories according to the frequency range they use to transmit data. Frequency means the frequency used inRFIDThe size of the radio wave that communicates between components in the system. These categories include low frequency (LF), high frequency (HF) and UHF (UHF).
In general,RFIDThe less the frequency of the system, the shorter the range of reading, the slower the rate of data reading. But there are trade-offs. Low frequencies can have a slower read rate, but they can be better read near or above the surface of a metal or liquid. More frequents may have a better range and speed, but they can be more easily destroyed by nearby metals or liquids. Let's look at each frequency range.
Low frequency
LF RFIDThe system operates within 30kHz to 300kHz and can read about 10 cm. These frequencies are long wavelengths, including the commonly used 125 kHz and 134 kHz bands, which have greater elasticity for radio-wave interference with metals or water in the environment.
Because of this resistance, the LF labels are usually used to...RFIDThe labels are fixed to use on metal base boards, such as car assembly lines or beer barrel stocks. Short reading ranges also lead to natural use in applications such as livestock tracking and access controls (doors and gates), where the range is not a problem or requires two elements to be brought together (e.g. secure building access).
HF
in this categoryRFIDThe label works within 3 MHz to 30 MHz and provides a potential reading distance of 10 cm to 1 m (39.4 inches). Most HFCs are available for use by the user. RFIDThe tag and system work frequency is 13.56 MHz, which is medium-sensitive to radio interference.
HF RFIDOne subset of the label is a near-range communication (NFC) label. All NFC tags are HFC tags, but not all HF tags fall into the NFC category. The read range of the NFC labels is much smaller - only a few centimetres - although an entire group of HFCs labels can be read at once, but one NFC label must be read at a time. The NFC label provides a secure one to one connection and applies it to non-contact payment applications. Since almost all smart phones can be used as NFC readers, the NFC labels are usually used in promotional labels and posters to increase individualized client participation.
The HF labels are used for a variety of purposes, from library media catalogues to tracking bracelets in thematic parks.
UHF
The UHF labels and systems operate at a frequency between 300 MHz and 3GHz, with faster data transmission rates, and can be read up to 12 metres (almost 40 feet). Although these labels are more sensitive to interference, they have lower production costs and remain the preferred option for many labeled inventory tracking (and other) applications.
Whether it is project-level tracking, retail inventory control, recyclable container tracking or other supply chain efficiency measures, the UHF labels will become a large-scale type of implementation for most organizations. You can read hundreds of labels at the same time, save time and money for manual inventory management, because you can calculate the whole car product at once.

Ms. Lei
Mr. Pang