Common types of metal-resistant RFID labels
Industry News

Common types of metal-resistant RFID labels

PublishedShanghai Zejie Smart Technology Co., Ltd.
Rapid advances in IoT technology have made RFID better known and more widely used, bringing higher performance requirements, particularly for UHF RFID systems based on electromagnetic backscatter. In practice, RFID tags often need to be placed on metal objects. Standard passive UHF RFID tags with dipole-like antennas suffer a sharp performance drop on metal and can become unreadable.
The effect of metal objects on the performance of label antenna parameters is highlighted in two ways, an antenna field and an antenna parameter. The site where the antenna works has a reader-launched inflow wave and a reflection that is repulsed by a metal plate, which is somewhat different from the reflection wave, resulting in some degree of offset to reduce the field ' s strength, so that the label antenna working in this environment does not detect enough currents to provide energy for the label core, making it impossible to activate the tag chip to work. The changes in antenna parameters are due to the fact that, while working on the metal surface, the metal plate is seen as part of the antenna itself, so that even if the physical size of the antenna has not changed, its resistance values, the S parameter and so on have changed, it leads to a decrease in the antenna performance.
So finding a suitable anti-metallic label is the guarantee.RFIDAnd what are the common UHF anti-metallic electronic labels? Let's talk about this.
Common metal-resistant labels are ABS, PCB, droppowder, ceramics, foam, soft metal-resistant electronic labels, and can be made into styles and shapes such as bars, squares, circulars. ABS-resistant metal tags are packaged in ABS engineering plastics with sunproof, water resistant, high temperature resistant, etc. They are widely used in logistics management. The PCB-resistant metal labels can be attached directly to the metal surface, without cumbersome installation. They are suitable for use on car plates and for open-air devices.
The drop-resistant metal label uses a base wrap that combines bubble cotton with drip-jelling, and is low-cost but relatively limited in reading distance. It is suitable for outdoor use. Softly resistant metal labels are flexible, bent, used for better metal resistance on the metal surface, good performance, good direction, long distances to read, suitable for wart assets like metal cylinders, and can be applied to RFID tag management.