What the hell is RFID? You'll see after reading it.
The device at the warehouse door reads the number of a box, and the computer shows which order it belongs to. This step appears simple, but contains two completely different processes: wireless devices confirm an identification, and business systems search for records on the basis of markings. The key to understanding RFID is to distinguish between what “the equipment read” and what “the enterprise knows about it”.
Start with a labeled item.
RFID is a radio frequency recognition technique. The system reads the information in the labels by corresponding wireless communication, and then provides the results to applications. Common components include labels, readers or corresponding reading/writing modules, antennas and business software; the combination depends on the form of the equipment and the context in which it is used.
In a box of products, for example, the labels usually keep or associate an identification code. The names of items, orders, inventory location and responsible persons, etc., can be stored in the back. After reading the code, software knows which files to search for. It is not necessary to label all business information, but rather that additional consideration be given to updating consistency and access rights.
Why do some labels have no batteries?
RFID can distinguish between passive, active and so forth. The passive label relies on the conditions required to perform the work in a reading-writing environment, with the source equipment having the corresponding power structure. Different designs vary in terms of maintenance, mode of communication, size and cost, and cannot be inferred from "battery or not."
The frequency segment is also important. The card that is read in close proximity, some NFC labels that are read on the mobile phone and UHF tags used for mass identification of items cannot be used to connect by default. Before selecting a device, you need to confirm the technology used in the label, the protocol and the target task, rather than being able to read and write from each other all products written on RFID.
"Do not match barcodes" is not the same as "can read anywhere."
RFID can reduce the dependency on visible bar codes in some settings, but actually read it by object material, position, label design, antenna configuration and environmental impact on the ground. Liquids, metals, stacking and directional changes may destabilize the tests that were originally passed on the desktop.
Similarly, a wireless reading cannot be considered an accurate location. The device receives a nearby label that does not necessarily indicate that the item is on a given shelf; it was read at the door and did not necessarily complete the library. It requires a reading area design, mission context or other information to convert observations into reliable business events.
You know, you're gonna have to use four words to separate the whole process.
| Steps | What's in the box-out library? |
|---|---|
| Identification | Device to read the encoding of box association |
| Association | Software to find box files and tasks to be performed |
| Judgement | Check if the box is currently active |
| Recording | Recording effective access to the library through a rights and consistency check |
Skip connections and judgments, use read-out to button up inventory is the source of many project problems. If the box is read over and over again at the door, software needs to know that it's a double observation in the same task, not multiple outs. The faster RFID reads, the more clear business rules are.
In what case, it's worth more than the original way.
If a lot of time is spent on double scans, looking for labels to go or check the identity of a group of items, RFID may bring room for improvement. But if business would have to look at the appearance on a case-by-case basis, there are few items, or if the object could not reasonably install the tag, the proceeds of adaptation will need to be re-estimated.
The input is not just labels and devices. Postmarking, coding, data cleansing, job modification, damage patches, staff training and system maintenance should be included in the cost. First, more time and additional work are actually saved in a process, then expansion is considered, usually better than starting with full-time automation.
The first pilot, three questions to close.
First, can the system continue to recognize real objects and environments? Second, does the read object always relate to the right mission? Thirdly, do people know how to continue working when they cannot read, read wrong or the network is broken? These three things have answers, so that the project starts to have a basis for doing business.
RFID does not automatically understand all labels. It provides a way to identify the object reliably. The moment when an enterprise actually gets value is when this identity information helps to make one touch less error, and a few counts of it, or a history can be made clear at last.

Ms. Lei
Mr. Pang