Cover of UHF electronic tags
Encapsulated Classification
From material:
1. Paper labels;
2. Plastic labels;
3. Glass tags.
From shape:
1. Credit card labels;
2. Linear tags;
3. Circle labels;
4. Handwatch labels;
5. Other shapes.
Processing of the envelope
Packaging consists of three main processes: fabricating the antenna substrate, making the inlay (primary packaging), and applying an insulating film to the substrate and die-cutting it (secondary packaging).
1. The creation of antenna panels currently consists mainly of two methods, one of which is the traditional etching process, and the other of a filamental printing process. The etching process involves processing aluminium beams and thin membrane into aluminium composite materials, and then printing colour preservatives to form new composite materials, and by corrosive production equipment to make the composite plate that shapes the antenna. This process is in fact a formative process of antenna composite material. Today, during the production of ultra-high frequency electronic tags, the ink is used primarily for printing RFID antennas, which are used to create metal antennas as an alternative to traditional pressure or corrosion.
2. Inlay ' s production (a one-package) means the process of making an inlay by duct tape of panels and chips with antennas, ultra-high frequencyTagThe most appropriate way to fit the envelope is to re-enact the chip technology (Flip Chip), which has high performance, low cost, miniaturization, high reliability characteristics, and to adapt to flexible base plate materials, re-loading of key-based material to conduct the glue to connect the chip with the antenna welding.
3. The base plate shall be coated with a diaphragm, damp (resealed). The UHF electronic labels are morphologically divided into three broad categories, namely, traditional tag classes (non-dry glue), retrofitting and card types.
4. Traditional self-adhesive electronic labels complete the encapsulation process with a label complex. The label consists of layers, chip line layers, film layer, bottom formation. The surface of the laminate can be made from various materials such as paper, PP and PET, using a coating device to cover the inlay layer, together with plastic sheet underlay, creating a wiring belt protection label, then embedding it, and combining with an imitated paper, forming a roll of undry tape tag, then following a modulated sequence, creating a single nondry glue electronic label;
5. Note plastics and PVC cards are similar to traditional card-making processes, i.e. oil coating on the printed Inlay surface, combined with printed base and bottom, creating large finished labels, then printing, laminate, and strutting, etc., into label cards that meet the standard dimensions of ISO 7810 cards, which can also be processed as different as required.
V. Technological parameters for UHF RFID tags
1. Energy requirements for labels: The energy requirements for labels are the range of energy required to activate the label chip circuit;
2. Transfer rate of labels: the rate at which the label gives feedback to a reader on the data carried and the rate at which the data-writing command from the reader is accepted.
3. Label speed: time determined by the reader ' s recognition and writing, usually ms
4. Label capacity: Data volumes generally available for 1024 Byte.
5. Seal form of label: Depending on the shape of the label antenna
From material:
1. Paper labels;
2. Plastic labels;
3. Glass tags.
From shape:
1. Credit card labels;
2. Linear tags;
3. Circle labels;
4. Handwatch labels;
5. Other shapes.
Processing of the envelope
Packaging consists of three main processes: fabricating the antenna substrate, making the inlay (primary packaging), and applying an insulating film to the substrate and die-cutting it (secondary packaging).
1. The creation of antenna panels currently consists mainly of two methods, one of which is the traditional etching process, and the other of a filamental printing process. The etching process involves processing aluminium beams and thin membrane into aluminium composite materials, and then printing colour preservatives to form new composite materials, and by corrosive production equipment to make the composite plate that shapes the antenna. This process is in fact a formative process of antenna composite material. Today, during the production of ultra-high frequency electronic tags, the ink is used primarily for printing RFID antennas, which are used to create metal antennas as an alternative to traditional pressure or corrosion.
2. Inlay ' s production (a one-package) means the process of making an inlay by duct tape of panels and chips with antennas, ultra-high frequencyTagThe most appropriate way to fit the envelope is to re-enact the chip technology (Flip Chip), which has high performance, low cost, miniaturization, high reliability characteristics, and to adapt to flexible base plate materials, re-loading of key-based material to conduct the glue to connect the chip with the antenna welding.
3. The base plate shall be coated with a diaphragm, damp (resealed). The UHF electronic labels are morphologically divided into three broad categories, namely, traditional tag classes (non-dry glue), retrofitting and card types.
4. Traditional self-adhesive electronic labels complete the encapsulation process with a label complex. The label consists of layers, chip line layers, film layer, bottom formation. The surface of the laminate can be made from various materials such as paper, PP and PET, using a coating device to cover the inlay layer, together with plastic sheet underlay, creating a wiring belt protection label, then embedding it, and combining with an imitated paper, forming a roll of undry tape tag, then following a modulated sequence, creating a single nondry glue electronic label;
5. Note plastics and PVC cards are similar to traditional card-making processes, i.e. oil coating on the printed Inlay surface, combined with printed base and bottom, creating large finished labels, then printing, laminate, and strutting, etc., into label cards that meet the standard dimensions of ISO 7810 cards, which can also be processed as different as required.
V. Technological parameters for UHF RFID tags
1. Energy requirements for labels: The energy requirements for labels are the range of energy required to activate the label chip circuit;
2. Transfer rate of labels: the rate at which the label gives feedback to a reader on the data carried and the rate at which the data-writing command from the reader is accepted.
3. Label speed: time determined by the reader ' s recognition and writing, usually ms
4. Label capacity: Data volumes generally available for 1024 Byte.
5. Seal form of label: Depending on the shape of the label antenna

Ms. Lei
Mr. Pang