Media characterization and signal stability study for RFID ceramic labels in high temperature environments
In high-temperature operating scenarios such as industrial manufacturing, metallurgical, ceramic burning, the application of RFID technologies is increasingly in demand, and the performance of labels in high-temperature environments is a key constraint on their wider application. The RFID ceramic labels are considered to be ideal for high-temperature conditions with their high temperature tolerance, high chemical stability, etc., but the effect of high temperatures on their electrical properties and signal stability has not been fully explored. Against this background, the system studies the patterns of changes in the media performance of RFID ceramic labels in high-temperature settings and their impact on signal transmission mechanisms.
The experiment uses a typical nanoportic base RFID label, which gradually increases temperature from room temperature to 500°C by means of high-temperature environment simulation boxes, monitors in real time changes in parameters such as the modulus label at different temperatures using a broadband spectrometer, and uses a medium loss angle positive tangent, and tests the signal reflection factor, reading distance, etc., when labeled at the corresponding temperature with vector network analyser. The results show that when temperatures exceed 200°C, the typologies of ceramic labels are fluctuated and the mitigated losses increase; above 350°C, the resistance of labels to antennas drops, leading to signal reflectivity enhancement, and the reading distance is reduced by about 25%. At the same time, in combination with microstructure analysis, it was found that the increase of ceramic crystal particles and changes in crystal lines caused by high temperatures are the main reasons for poor inter-mediary performance.
This study provides an important theoretical and data support for the optimal design of RFID systems in high temperature environments, for the improvement of label material and for the application of parameter adjustments by quantifying the effects of high temperatures on the RFID ceramic labels, the characteristics of the medium and signal stability.

Ms. Lei
Mr. Pang